NXDN™ IC-F5400D/IC-F6400D SERIES PRODUCT GUIDE
16
The new functions are included in the main firmware revision 1.6 or later.
•
Bluetooth
®
function
A third party Bluetooth
®
headset (3M™ PELTOR™ WS™ Headset XP, 3M™ PELTOR™ WS™ ProTac XP,
or 3M™ PELTOR™ WS™ Alert XP)* can be used for wireless headset operation. This allows you a flexible
installation style, and will not restrict operator’s activity caused by the connection cable and its length.
The adopted Bluetooth
®
is compatible with Class 1 and Bluetooth
®
version 2.1+EDR, and the details of the
compatible profile are as shown in the table below.
*Only PTT switch action is checked. Icom does not guarantee all functions and performance of the
Bluetooth
®
headset.
Table 4-1. Compatible profile
Profile
Application
HFP (Hands-Free Profile)
Used when transmitting/receiving a signal, hands
free.
HSP (Headset Profile)
Used with a connected headset.
SPP (Serial Port Profile)
Used when connecting two devices using a virtual
serial port. (Used for programming the transceiver
without a programming cable.)
•
Active Noise Cancelling function
The Active Noise Cancelling function, which is already used in Icom marine transceivers, can suppress
background noise. By using this function, you can transmit clear voice even in a noisy environment, such as
in a downtown area, or near a high traffic main road. The function can also be activated while receiving a call.
The suppression level of the Active Noise Cancelling function can be set to one of three levels. Up to 30%*
of noise for transmit audio, and up to 90%* of noise for receive audio will be suppressed.
*Theoretical value.
Figure 4-1. Active Noise Cancelling function’s image
SECTION 4 NEW FUNCTION INTRODUCTION
Active Noise Cancelling
Background noise
Voice
Background noise is suppressed.
Voice
Summary of Contents for NXDN IC-F5400D SERIES
Page 26: ......
