1
BEFORE USING
1-2
Attaching the belt clip
TIP: When attaching a hand strap (User supplied)
2
2
2
2
1
1
1
1
2
2
1
1
Clip cover
Supplied
belt clip
When removing the belt clip, lift
the tab up
1
, and slide the belt
clip in the direction of the arrow
2
�
Slide the belt clip in the direction of the
arrow until the belt clip locks in place, and
makes a ‘click’ sound�
2
2
2
2
1
1
1
1
2
2
1
1
Clip cover
Hand strap (User supplied)
Before attaching the belt clip, remove the
clip cover�
Battery charging
Fully charge the transceiver before using for the
first time, or if it has not been used for more than 2
months�
• The charger automatically restarts charging when the
battery voltage drops�
• Disconnect the AC adapter from the outlet when the
charger is not in use�
CAUTION:
Read the ‛Battery caution’ and ‛Charging
caution’ on INSTRUCTIONS (supplied with the
transceiver) before charging�
NOTE:
• Use a 5 V/2 A output AC adapter�
• The charging time may differ, depending on the AC
adapter� When you use a low output AC adapter, it may
take longer to charge, or the transceiver may not be
charged�
• Before using the AC adapter, thoroughly read its
instructions�
L
You can charge up to 4 IP110Hs together by
using 4 BC-257 optional chargers and the BC-228
optional AC adapter� See page 5-4 for details�
AC adapter (User supplied)
Supplied USB cable
Connector
cover
Status indicator
Lights blue: Charging
Not lit:
Charged
Turn OFF