33
7
DSC OPERATION
New2001
Transmitting a Group call
D
The Group call function allows you to transmit a DSC signal
to only a specific group.
Enter “GROUP CALL” in the DSC CALLS menu.
q
MENU
➪
DSC
➪
Group Call
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
Select the desired pre-programmed group address or
w
“Manual Input,” using dial or [
Y
]/[
Z
], then push [ENT].
• The ID code for the Group call can be set first. (p. 20)
• When “Manual Input” is selected, set the 8 digit ID code for the
group you wish to call.
e
Select a desired intership channel using dial or [
Y
](CH)/
[
Z
](CH), then push [ENT].
• Intership channels are already preset into the transceiver in the
recommended order.
About Manual Inputting:
Enter a desired group ID in the following way:
• Select a desired number using [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] or dial to set it.
• To move the cursor, rotate dial or
select either arrow, “
←
” or “
→
,”
then push [ENT] or dial.
• The first digit is specified as ‘0’ for a Group ID.
• The first two digits are ‘0’ for any Coast station ID.
Summary of Contents for iM506
Page 122: ......
