![background image](http://html1.mh-extra.com/html/icom/im506/im506_instruction-manual_4733725114.webp)
105
12
CONNECTIONS AND MAINTENANCE
MB-75/MB-132 installation
■
An optional MB-75/MB-132
flush
mount
Kit
is available for
mounting the transceiver to a flat surface such as an instru-
ment panel.
KEEP
the transceiver and microphone at least 1 meter
(3.3 feet) away from the vessel’s magnetic navigation com-
pass.
q
Using the template on page 112, carefully cut a hole into
the instrument panel, or wherever you plan to mount the
transceiver.
w
Slide the transceiver through the hole, as shown below.
D
MB-75 installation
q
Attach the 2 supplied bolts (M5
×
8 mm) on either side of
the transceiver.
w
Attach the clamps on either side of the transceiver.
• Make sure that the clamps align parallel to the
transceiver’s
body.
w
w
Clamp
Supplied bolt
e
Tighten the end bolts on the clamps (rotate clockwise) so
that the clamps press firmly against the inside of the in-
strument control panel. (Torque: 0.6 N
•
m)
r
Tighten the locking nuts (rotate counterclockwise) so that
the transceiver is securely mounted in position as below.
t
Connect the antenna and power cable, then return the in-
strument control panel to its original place.
Summary of Contents for iM506
Page 122: ......