background image

5

2

PANEL DESCRIPTION

u

10-KEYPAD 

(Depending on version)

The keypad allows you to enter digits to:

• Select memory channels
• Select tone channels
• Select DTMF codes (during transmit)
• Set TX codes
• Set SmarTrunk II™/SmarTrunk 3G™ codes
• Set BIIS status number
• Input text message for SDM operation
• Start up with the passcode

i

UP/DOWN KEYS

Push to select an operating channel.

Push to select a TX code channel after pushing 
[TX CODE CH SELECT].

Push to select a DTMF channel after pushing [DTMF].

Push to select a scan group after pushing and holding
[SCAN].

Push to select a BIIS code, status number or SDM after
pushing [DIGITAL].

*Desired functions can be programmed independently by your

dealer. (p. 7)

o

PTT SWITCH [PTT]

Push and hold to transmit; release to receive.

Push to transmit the call during MSK operation, depend-
ing on the setting.

!0

MONITOR KEY

Activates one of (or two of) the following functions on each
channel independently.

• Push and hold the key to unmute the channel (audio is emitted;

‘audible’ condition).

• Push the key to toggle the mute and unmute conditions (toggles

‘audible’ and ‘inaudible’).

• Push the key to mute the channel (sets to ‘inaudible’ only).
• Push the key to unmute the channel (sets to ‘audible’ only).
• Push the key after communication is finished to send a ‘reset

code.’

• Push the key after communication is finished to send a ‘clear

down code’ during BIIS operation on an MSK channel

NOTE:

The unmute condition (‘audible’ conditions) may

automatically return to the mute condition (‘inaudible’
condition) after a specified period.

*Desired function can be programmed by your dealer. (p. 7)

!1

ANTENNA CONNECTOR

Connects the supplied antenna.

!IC-F44GT_GS.qxd  04.5.7 1:47 PM  Page 5 (1,1)

Summary of Contents for iF44GS

















































Reviews: