![background image](http://html1.mh-extra.com/html/icom/if34gt/if34gt_instruction-manual_4249661034.webp)
30
5
MDC 1200 SYSTEM OPERATION
D
Emergency Calls
The MDC 1200 Emergency feature can be accessed using
the [Emergency Single] or [Emergency Repeat] key (p. 9).
The optional UT-124
man
down
unit
can also activate this
feature. The transceiver will repeatedly send an Emergency
MDC 1200 command to the dispatcher for a programmed
length of time until it receives an acknowledgement signal.
The emergency call can be transmitted without a beep emis-
sion, and the LCD indication depends on how emergency is
programmed.
With MDC 1200 Emergency, the transceiver can also be
programmed to keep the microphone open during an emer-
gency call, allowing monitoring of the situation.
Ask your dealer for details.
D
Programming station ID code
If your transceiver is equipped with a 10-keypad, you can
enter a station ID code from the keypad for the SelCall, Call
Alert or Radio Check Call functions.
q
Push [MDC Call] to enter the MDC menu selection mode.
w
Select “SELCALL”, “RADIOCHK” or “CALALERT” using
[CH Up], [CH Down], [MDC Up] or [MDC Down].
e
Push [MDC Call] again to enter the transceiver alias se-
lection mode.
r
Push any key of the keypad to enter the ID code program-
ming condition.
• The first digit blinks as below.
t
Push [UP] to move the cursor to the right, push [DOWN]
to move the cursor to the left.
y
When the last digit of the desired ID has been entered,
push [PTT] to transmit.
• Available characters
Key
Characters
Key
[0]
[1]
[2]
[3]
[4]
[5]
Characters
(0)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(A)
(D)
(B)
(E)
(C)
(F)
[6]
[7]
[8]
[9]
[
M
]
[#]
(3)
(D)
(E)
(F)
(A)