![background image](http://html1.mh-extra.com/html/icom/if34gt/if34gt_instruction-manual_4249661019.webp)
3
BASIC OPERATION
USING [TX CODE ENTER] KEY:
q
Select the desired TX code channel via [TX Code CH Up]
or [TX Code CH Down].
w
Push [TX Code Enter] to enter the TX code edit mode.
• The digit to be edited blinks.
e
Push [TX Code Enter] to select the desired digit to be edited.
r
Set the desired digit using [CH UP], [CH DOWN], [TX
Code CH Up] or [TX Code CH Down] or 10-keypad.
t
Push [TX Code Enter] to set the digit. The digit to the right
will blink automatically.
• When the 10-keypad is used to set, the editable digit will move
to the right automatically without pushing [TX Code Enter].
y
Repeat
r
and
t
to input all allowable digits.
u
After editing, push [TX Code Enter] to set.
• Return to the stand-by mode.
i
Push [Call] to transmit.
D
DTMF transmission
If the transceiver has [DTMF Autodial] assigned to it, the
automatic DTMF transmission function is available. Up to 8
DTMF channels are available.
TO SELECT A TX CODE:
q
Push [DTMF Autodial]— a DTMF channel appears.
w
Push [CH UP] or [CH DOWN] to select the desired DTMF
channel.
e
Push [DTMF Autodial] to transmit the DTMF code in the
selected DTMF channel.
■
User set mode
User set mode is accessed with [User Set Mode] and allows
you to set seldom-changed settings. In this case you can
“customize” the transceiver operation to suit your prefer-
ences and operating style.
Entering the user set mode:
q
Push and hold [User Set Mode] to enter user set mode.
Push [User Set Mode] momentarily to select the item.
Then push [UP] or [DOWN] to set the desired level/condi-
tion.
• Available set mode functions are
Backlight, Beep, SQL Level,
Mic Gain and Battery Voltage.
w
Push and hold [User Set Mode] to exit user set mode.
■
Scrambler function
The voice scrambler function provides private communica-
tion between stations. All versions have a built-in frequency
inversion type scrambler; however, an optional rolling or non-
rolling type is available as well.
q
Push [Scrambler] to turn the scrambler function ON.
• “ ” appears.
w
Push [Scrambler] again to turn the scrambler function
OFF.
• “ ” disappears.
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16