background image

4

1

PREPARATION

Programmable key functions

 

Programmable key functions

 

D

LONE WORKER

When the Lone Worker function is turned ON, and no opera-
tion occurs during the preprogrammed time period, the Emer-
gency function is automatically turned ON.

<For the IC-F3210D/F4210D series transceivers>

 Hold down for 1 second to turn ON the Lone Worker func-

 

tion.
Push to turn OFF the Lone Worker function.

 

<For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>

Push to turn the Lone Worker function ON or OFF.

RAN CH SELECT

<For the IC-F3210D/F4210D series>

N/A

<For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>

While  in  the  digital  mode,  push  to  enter  the  RAN  channel 
selection mode. Then push [CH Up] or [CH Down] to select 
a desired RAN code. After selecting, push this key again to 
save the code.

EMERGENCY

 Hold down for 1 second to turn ON the Emergency func-

 

tion.

   While in the analog mode, after the Start or Repeat timer 

period ends, the microphone audio may be automatically 
transmitted, depending on the presetting.

   While in the digital mode, after the Start or Repeat timer 

period  ends,  a  digital  command  Emergency  call  is  auto-
matically  transmitted  once,  or  repeatedly,  depending  on 
the  presetting.  After  transmitting  an  Emergency  call,  the 
microphone  audio  may  be  automatically  transmitted,  de-
pending on the presetting.

  •  If  you  want  to  cancel  the  emergency  call,  hold  down  the  key 

again, before transmitting it.

ENCRYPTION

<For the IC-F3210D/F4210D/F3230D/F4230D series transceivers>

 While in the digital mode, hold down for 1 second to turn 

 

ON the Encryption function.
Push to turn OFF the Encryption function.

 

<For the IC-F5220D/F6220D series transceivers>

While in the digital mode, push to turn the encryption function 
ON or OFF.

Summary of Contents for IDAS IC-F3210D

































Reviews: