25
■
USB driver un-installation
IMPORTANT!
As described at first of this section, USB driver is
installed for each unit and connector.
However, only one USB driver can be un-installed
when using “Add and Delete” included in OS. So,
you should perform the USB driver un-installation
with the following instructions.
Un-install the USB drivers as follows.
In this section, describes the un-installation instruc-
tion with Windows XP for example.
q
Start up Windows.
w
Insert the CD that supplied with the ID-RP2000V
into the CD drive.
e
Open the CD drive directory using “My Computer”
or “Explorer.”
• Contents of the CD are displayed.
Double click
r
Double click the “Driver” and then the appropriate
folder for your OS to open and display the folder
contents.
Click
t
Run the appropriate ‘exe’ fi le according to the OS.
• For Windows XP/2000
:
“ICOM_UNIN_NT.EXE”
• For Windows 98SE/Me
:
“ICOM_UNIN_9x.EXE”
Click
Click
y
The un-installer starts automatically.
•
The un-installer starts several times according to the
number of installed USB drivers.
•
When the dialog box as at left is displayed, make sure
no equipment is connected to the USB port, then click
[Continue].
•
When the screen as at left below appears after the un-
installation, click [Finish].
4
DRIVER INSTALLATION