![background image](http://html2.mh-extra.com/html/icom/id-51a/id-51a_basic-instructions_5210187050.webp)
New2001
49
New2001
RESETTING
14
■
Resetting
The display may occasionally display erroneous information
(for example when first applying power). This may be caused
externally by static electricity or by other factors.
If this problem occurs, turn OFF power.
After waiting a few seconds, turn ON power again. If the prob-
lem persists, perform a Partial reset or an All reset.
A Partial reset resets operating settings to their default values
(VFO frequency, VFO settings, menu contents) without clear-
ing the items below:
• Memory channel contents
• Scan Edge contents
• Call channel contents
• Call sign memories
• Message data
• DTMF memory contents
• GPS Memory contents
• Repeater list
• BC Radio Memory
BE CAREFUL! An All reset clears all programming and
returns all settings to their factory defaults. See the PDF
type Advanced Instruction for more details.
q
Push [MENU]
to enter
the Menu screen.
Push D-pad(
w
) to select the
root item (Others), and then
push D-pad(Ent) to go to the
next level.
D-pad
(
�
)
(Ent)
( MENU > Others > Reset >
Partial Reset)
Refer to the menu sequence
e
shown directly above and
push D-pad(
) to select, and
then push D-pad(Ent) to en-
ter, one or more times until
the last screen is displayed.
D
Partial reset
Go to step
r