![background image](http://html2.mh-extra.com/html/icom/id-51a/id-51a_basic-instructions_5210187047.webp)
New2001
46
12
GPS LOGGER FUNCTION
New2001
12
GPS L
OGGER
FUNCTION
STEP 2
Turning ON the GPS Logger function
q
Push [MENU]
to enter
the Menu screen.
Push D-pad(
w
) to select the
root item (GPS), and then
push D-pad(Ent) to go to the
next level.
D-pad
(
�
)
(Ent)
( MENU > GPS > GPS Logger
>
GPS Logger)
Refer to the menu sequence
e
shown directly above and
push D-pad(
) to select, and
then push D-pad(Ent) to en-
ter, one or more times until
the last screen is displayed.
r
Push D-pad(
) to select
“ON.”
Push [MENU]
t
to exit the
Menu screen.
• The GPS Logger starts.
NOTE:
• Once the GPS logger function is turned ON, the trans
-
ceiver continuously stores the position data from the
GPS receiver, even if the transceiver is rebooted. To can-
cel this function, turn the function OFF.
While this function is ON, and when the transceiver is
turned OFF, the log file will be closed. Then the trans-
ceiver is turned ON and positioning is carried out by the
GPS receiver, a new log file will be created.
• When the microSD card is full, this function will be auto
-
matically paused.
<About log file>
You can display your route as you move, if you import the log
file into a mapping software.
• You can see your route on the software map. The files may not be
compatible with all mapping software.
• See the PDF type Advanced Instruction for copying the log file to
your PC.
Go to step
r