![background image](http://html1.mh-extra.com/html/icom/ic-v86/ic-v86_advanced-manual_2038147023.webp)
5
MEMORY/CALL OPERATION
5-6
Each memory channel and the Call channel can be
programmed with an alphanumeric channel name,
for easy recognition. Names can be a maximum of 5
characters.
D
Setting the display type
1. Hold down [ ] for 1 second to turn OFF the
transceiver.
2. While holding down [
Y
] and [
Z
], turn ON the
power to enter the Initial Set mode.
3. Push [
Y
]/[
Z
] to select the display type item. (dSP)
4. Rotate [VOL] to select “dSP.nm.”
5. Push [# ENT] to exit the Initial Set mode.
D
Programming a channel name
1. Select the channel name display in the Initial Set
mode. (See the above topic.)
2. Push [VFO/MR/CALL] several times to select the
memory mode or Call channel mode.
•
For memory channel:
Push [
Y
] or [
Z
] to select the desired memory
channel.
3. Push [FUNC], and then push [SET] to enter the
channel name programming mode.
• Acursorblinksforthefirstcharacter.
4. Rotate [VOL] to select a character.
• The selected character blinks.
5. Push [
Y
] to move the cursor right, push [
Z
] to
move the cursor left.
6. Repeat steps 4 and 5, until the desired channel
name is completed.
7. Push [# ENT] to exit the programming mode.
The “Display type” item in the Initial Set mode
(“Name” is selected)
Example: Programming “CALL” into memory
channel 12.
Push
or
to select channel 12.
Push
, and then push
.
Rotate [VOL] to select the character,
and then push
or
to move the cursor.
Push
to exit the programming mode.
Repeat until the name is complete.
(Memory mode)
D
Selectable characters
(J)
(W)
(0)
( I )
(V)
(9)
(A)
(n)
(1)
( + )
(H)
(U)
(8)
(
:
)
(C)
(P)
(3)
( = )
(F)
(S)
(6)
( ( )
(G)
(t)
(7)
( ) )
(d)
(q)
(4)
(
*
)
(k)
(X)
(L)
(y)
(m)
(Z)
(b)
(O)
(2)
( - )
(E)
(R)
(5)
(
/
)
(Space)
Programming channel names