![background image](http://html1.mh-extra.com/html/icom/ic-t90a/ic-t90a_instruction-manual_2038092051.webp)
46
6
SCAN OPERATION
y
y
SCAN OPERA
TION
■
VFO scan
The following scans are available for the VFO scan.
FULL SCAN
Repeatedly scans all frequencies over the entire receive
range.
• Some frequency ranges are restricted depending on versions.
BAND SCAN
Repeatedly scans all frequencies over the entire selected
band.
PROGRAMMED SCAN
Repeatedly scans between two user-programmed frequen-
cies. Used for checking for frequencies within a specified
range such as repeater output frequencies, etc.
Skip frequencies are not scanned when the frequency skip
function is in use. (“P SKIP” appears)
If the same frequencies are programmed into a pair of
scan edges, programmed scan does not start.
For programmed scan, scan edges must be programmed
in advance. Program scan edges in the same manner as
programming a memory channel. (p. 37)
q
Select VFO mode with [VFO].
w
Push [5 SKIP] for 1 sec. to toggle the frequency skip func-
tion ON or OFF.
• “P SKIP” appears when the frequency skip function is turned ON.
e
Set the squelch level, if desired.
r
While pushing [MODE SCAN], rotate [DIAL] to select the
desired scan range.
• “ALL” for full scan, “BAND” for band scan or “PROG 0–24” for
programmed scan.
t
Release [MODE SCAN] to start the scan.
• Decimal point blinks while scanning.
• “P SKIP” blinks when the frequency skip function is turned ON.
• To change the scanning direction, rotate [DIAL].
• If the pocket beep or DTCS beep function is activated, the trans-
ceiver automatically selects the tone squelch or DTCS squelch
function when a scan starts.
y
To stop the scan, push [VFO].
FM
SKIP
P
Full scan
Band scan
Programmed scan
Scanning example
Flashes while scanning.
IC-T90A_IM.qxd 02.6.6 08:44 AM Page 49 (1,1)
Summary of Contents for IC-T90A
Page 96: ...Blank page...
Page 99: ......
Page 100: ...on us 1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan EX apan m Inc...