![background image](http://html1.mh-extra.com/html/icom/ic-t90/ic-t90_instruction-manual_2038091038.webp)
33
4
BASIC OPERATION
■
Auto repeater function
(U.S.A. and Korea versions only)
The U.S.A. and Korea versions automatically activate the re-
peater settings (duplex ON/OFF, duplex direction, tone en-
coder ON/OFF) when the operating frequency falls within or
outside of the general repeater output frequency range. The
offset and repeater tone frequencies are not changed by the
auto repeater function, reset these frequencies, if necessary.
D
Frequency range and offset direction
• U.S.A. version
• Korea version
q
Select VFO mode with [VFO].
w
Push [8 SET] for 1 sec. to enter set mode.
e
Rotate [DIAL] until “AUTO RP” appears.
r
Push [8 SET] to select auto repeater set mode.
t
Rotate [DIAL] to turn the auto repeater function ON (DUP
ONLY or DUP TONE) or OFF.
U.S.A. version:
• “DUP ONLY” Activates duplex only.
• “DUP TONE” Activates duplex and tone.
• “OFF”
Auto repeater function is turned OFF.
Korea version:
• “ON”
Activates duplex and tone.
• “OFF”
Auto repeater function is turned OFF.
y
Push [VFO] to exit set mode.
DUP
DUP
Duplex activated only.
Duplex and tone activated.
Duplex and tone activated.
Auto repeater function
is turned OFF.
FREQUENCY RANGE
SHIFT DIRECTION
439.000–440.000 MHz
“–DUP” appears
FREQUENCY RANGE
SHIFT DIRECTION
1
51.620–
1
51.995 MHz
1
52.500–
1
52.995 MHz
1
53.500–
1
53.995 MHz
“–DUP” appears
147.000–147.395 MHz
“DUP” appears
442.000–444.995 MHz
“DUP” appears
447.000–449.995 MHz
“–DUP” appears
145.200–145.495 MHz
146.610–146.995 MHz
“–DUP” appears
IC-T90A_IM.qxd 02.6.6 08:44 AM Page 36 (1,1)