manualshive.com logo in svg

Icom IC-RX7, Instruction Manual

Share
Download
Icom IC-RX7 Instruction Manual Download Page 80

New2001

72

8

MENU SCREEN OPERATION

New2001

■

 Display menu items

D

 Display backlighting (BACKLIGHT)

The receiver has display backlighting with a 5 sec. timer for 
night time operation. The display backlighting can be turned 
ON continuously or turned OFF, if desired.

• OFF  : The backlight is turned OFF.
• ON 

:  The backlight continuously lights ON.

• AUTO :  Lights when an operation is performed, goes out 

after 5 sec. (default)

Auto setting

Continuously ON setting

D

 LCD contrast (LCD CONTRAST)

The contrast of the LCD can be selected from 15 levels.

• 1 

(Low contrast)

 to 15 

(High contrast)

 

(default: 8)

Low contrast

High contrast

D

 Opening logo (OPENING LOGO)

The opening logo indication 

(Icom logo and receiver name)

 that 

is displayed at power ON can be skipped, if desired.

• OFF 

: Opening logo indication is skipped.

• ON 

: Opening logo is displayed at power ON. 

(default)

Opening logo is ON

Opening logo is OFF

D

 Font size (FONT SIZE)

Displayed character size for group/name during scan opera-
tions or category during basic search operation is selectable 
from Large and Small.

• SMALL  :  Makes 16 characters on the line.
• LARGE  :  Makes 12 characters on the line 

(Scroll the 

characters if the longer than 13 characters)

. 

(de-

fault)

Large font size

Small font size

Summary of Contents for IC-RX7













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands