New2001
52
7
MEMORY PROGRAMMING
New2001
D
New CATEGORY programming
q
Push [
r
] or [
s
] (or rotate [DIAL]) to select the desired
information.
Selectable information:
• NAME
• ICON
• SKIP
• LINK
• DIRECT KEY
• NEXT (Edit GROUP programming)
NAME (Category name)
q
Push [ENT MW] (or [
w
]) to edit the name programming.
w
Rotate [DIAL] to select the desired character.
• Push [
r
] or [
s
] to select the character group from “ABC”
(alphabetical characters; capital letters), “abc” (alphabetical
characters; lower case letters), “123” (numbers) or “!”#” (sym-
bols). See next page for available characters details.
• Push [
v
] or [
w
] to move the cursor left or right, respectively.
• Push [CLR SQL] to clear the selected character.
• Push and hold [CLR SQL] to repeat clearing continuously.
ICON
q
Push [ENT MW] (or [
w
]) to edit the setting state.
w
Push [
r
] or [
s
] (or [
v
]/[
w
]) (or rotate [DIAL]) to se-
lect the desired icon, then push [ENT MW].
SKIP, LINK
q
Push [ENT MW] (or [
w
]) to edit the setting state.
w
Push [
r
] or [
s
] (or rotate [DIAL]) to select the desired
setting, then push [ENT MW].
DIRECT KEY
q
Push [ENT MW] (or [
w
]) to enter the number input.
w
Edit the desired 2 digit number with keypad.
• Duplicated number can not be assigned in the same cat-
egory (including direct key for group).
• See p. 51 for direct key operation details.
w
Push [
s
] (or rotate [DIAL]) to select “NEXT,” then push
[ENT MW] to enter the GROUP programming state.
