18
4
OPTIONAL UNIT INSTALLATION
■
Optional unit installation
Install the optional unit as follows:
q
Rotate
[VOL]
to turn the power OFF, and remove the battery
pack. (p. 3)
w
Remove the unit cover.
NOTE:
Use a flat head screw driver or a similar flat instru-
ment, and insert into the hollow of the chassis, then lift and
take away the unit cover. (The removed cover cannot be used
again.)
e
Install the unit as shown below.
r
Replace the unit cover and the battery pack, then rotate
[VOL]
to
turn the power ON.
NOTE:
The optional UT-109/UT-110
SCRAMBLER UNITS
requires
some PC board modifications. Please refer to the additional in-
stallation as at right.
*This illustration is
described with the
UT-110.
IC-F14_F24-6.qxd 06.9.29 6:09 PM Page 18 (1,1)