SET MODE
9
59
MESSAGE
ON
BEEP
ON
CONTRAST
LOW HI
LIGHT
AUTO 5SEC
PROGRAM SKIP
OFF
MEMORY SKIP
ON
POWER SAVE
1:4
SCAN DELAY
5SEC
52
CI-V ADDRESS
CI-V BAUD
9600
CI-V TRN
ON
VFO
FM
144.0000
MEMO
FM
A00 144.0000
CLR
SET
FUNC
+
CLR
EASY
FM
0: 0.5000
Set mode flow chart
■
General
What is SET mode?
SET mode is accessed from VFO,
MEMORY or EASY mode and allows
you to modify certain receiver condi-
tions to suit your operating require-
ments.
Adjusting these settings to your own in-
dividual preferences allows you to “cus-
tomize” the receiver’s operating
parameters to suit your operating style.
If you are not sure what effect changing
a particular condition will have on the
receiver’s performance—experiment
with different settings. Don’t worry, there
is no way you can damage the receiver
by altering these settings.
There are 11 conditions which can be
modified in SET mode. The displays at
right show the initial or all reset (p. 70)
conditions. See the following pages for
an example of each condition and how
to modify them.
