53
10
SET MODE
D
D
Dial select step
Select the tuning step while pushing and
holding
[FUNC]
from 100 kHz, 1 MHz (de-
fault) and 10 MHz.
D
D
Offset frequency
Sets the offset frequency for duplex (re-
peater) operation for each frequency band in-
dependently within 0 to 159.995 MHz range.
During duplex operation (–DUP or +DUP),
the offset frequency shifts the transmit fre-
quency (or while
[SQL] (
ATT
•
SET
)
is pushed).
The default value may differ according to the selected fre-
quency band
(before accessing
set mode
)
and transceiver ver-
sion.
The selected tuning step in
VFO mode
is used for setting
the offset frequency.
D
D
Tone selection
Sets the tone encoder, tone squelch or DTCS
squelch operation and pocket beep capabil-
ity, when waiting for the desired signal.
• OFF
: Regular noise squelch operation. (default)
• TONE
: Using tone encoder. Some repeaters require
subaudible tones to be accessed.
• TSQL
: Using tone squelch. The squelch opens only
when a signal with matched subaudible tone is
received.
• P BEEP : In addition to the “TSQL” setting, alert beeps
will sound when a signal with matched tone is
received.
• DTCS
: Using DTCS squelch. The squelch opens only
when a signal with matched DTCS code is re-
ceived.
• P DTCS : In addition to the “DTCS” setting, alert beeps
will sound when a signal with matched DTCS
code is received.
The subaudible tone frequency and DTCS code are pro-
grammed as the tone frequency and DTCS code items, re-
spectively.
ATT
DTCS
T SQL
WFMAM -DUP
LOW
VOL PRIO P SKIP MR
5
1
9
ATT
DTCS
T SQL
WFMAM -DUP
LOW
VOL PRIO P SKIP MR
5
1
9
DTCS squelch operation
Tone squelch operation
ATT
DTCS
T SQL
WFMAM -DUP
LOW
VOL PRIO P SKIP MR
5
1
9
ATT
DTCS
T SQL
WFMAM -DUP
LOW
VOL PRIO P SKIP MR
5
1
9
ATT
DTCS
T SQL
WFMAM -DUP
LOW
VOL PRIO P SKIP MR
5
1
9
ATT
DTCS
T SQL
WFMAM -DUP
LOW
VOL PRIO P SKIP MR
5
1
9
1 MHz step
100 kHz step