![background image](http://html1.mh-extra.com/html/icom/ic-m94d/ic-m94d_instruction-manual_2038058044.webp)
35
9
DSC OPERATION
■
Receiving DSC calls (Distress)
The transceiver receives Distress calls, Distress Acknowledgements, and Distress Cancel
calls. When you receive a call, an emergency alarm sounds.
NOTE:
The screens that are displayed when a Distress call or an Acknowledgement
is received slightly differ from one another. The following steps are described using an
example of receiving a Distress call.
When a Distress call is received:
•The emergency alarm sounds until you turn it OFF.
•“RCVD Distress” is displayed.
1. Push
to turn OFF the alarm.
2.
Push the Software Key below for the intended operation.
:
(Ignore)
Ignores the call and returns to the operating
screen.
•The call is saved in the DSC Log.
•“ ” blinks continuously until you display the
call message.
:
(Hold)
Puts the received call on hold, and returns to
the operating screen.
L
You can check the DSC calls that are on hold
:
(Pause)
Pauses the countdown until the assigned
channel is automatically selected.
•Push
to resume the
countdown.
•The call is saved in the DSC Log.
L
is not displayed if the “CH Auto Switch”
item is set to “Manual (TEMP).” (p. 42)
:
(Accept)
Accepts the call.
•Channel 16 is automatically selected.
•Monitor Channel 16 as a coast station may
require assistance.
•
After Channel 16 is selected, select your next
operation by pushing the Software Key below
the following options.
: Closes the Distress operation, and
returns to the operating screen.
: Displays the information of the received
Distress Acknowledgement.
: Displays the “Distress History.”
: Changes the output power.
Summary of Contents for IC-M94D
Page 86: ...MEMO...
Page 87: ...1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17 MEMO...