![background image](http://html1.mh-extra.com/html/icom/ic-m94d/ic-m94d_instruction-manual_2038058019.webp)
10
4
BATTERY CHARGING
4
7
10
15
18
8
13
5
11
16
9
14
6
12
17
1
2
3
■
Battery charger
NOTE:
The transceiver
MUST
be turned OFF while charging. Otherwise:
- The battery will not be charged correctly.
- The battery life may be shortened.
NOTE:
Be sure the tabs on the
transceiver are correctly aligned with the
guide rails inside the battery charger.
Tabs
Guide rail
D
Mounting the Battery charger
Supplied screws
D
Supplied battery charger
Charging time:
Approximately 4 hours for the BP-306
Battery charger
Power
adapter*
CP-26
* (for a 12 V
cigarette lighter socket)
can be used instead of
the power adapter*.
Turn OFF
* May not be supplied, or the shape may be
different, depending on the transceiver version.
L
“Charging” is displayed and bars of the
battery icon scroll while charging.
L
“Full Charge” is displayed when the
battery has been fully charged, and then
disappears after 10 seconds.
NOTE:
•
DO NOT
transmit while charging.
If you need to transmit, remove the
transceiver from the charger, and then
turn ON the transceiver.
•If the battery pack does not properly
charge, remove the transceiver from the
charger and insert the transceiver into
the charger again.
L
If error is detected, “Charging Error” is
displayed.
•The CP-26 is equipped with a 1.5 A fuse.
If the fuse blows, repair the problem,
then replace it with a new rated fuse.
DO NOT
use fuses with amp ratings
other than the ratings written below.
Fuse
CP-26: (1.5 A/250 V)
Summary of Contents for IC-M94D
Page 86: ...MEMO...
Page 87: ...1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17 MEMO...