![background image](http://html1.mh-extra.com/html/icom/ic-m90/ic-m90_instruction-manual_2038048020.webp)
14
DUALWATCH/TRI-WATCH
6
■
Description
Dualwatch monitors Channel 16 while you are receiving
another channel; tri-watch monitors Channel 16 and the call
channel while receiving another channel.
■
Operation
q
Select the desired operating channel.
w
Push
[SCAN•
DUAL
]
for 1 sec. to start dualwatch or tri-watch
(depending on the SET mode setting).
• “DUAL” blinks during dualwatch; “TRI” blinks during tri-watch.
• A beep tone sounds when a signal is received on Channel 16.
•
Tri-watch becomes dualwatch when receiving a signal on the
call channel.
e
To cancel dualwatch/tri-watch, push
[SCAN•
DUAL
]
again.
DUALWATCH/TRI-WATCH SIMULATION
Dualwatch
Tri-watch
Call channel
• If a signal is received on Channel 16, dualwatch/tri-watch
pauses on Channel 16 until the signal disappears.
• If a signal is received on the call channel during tri-watch,
tri-watch becomes dualwatch until the signal disappears.
• To transmit on the selected channel during dualwatch/tri-
watch, push and hold [PTT].
[Example]:
Operating tri-watch on INT channel 07.
Push
for 1 sec.
Signal is received
on the call channel.
Signal is received
on Channel 16
takes priority.
Tri-watch resumes
after the signal
disappears.
Tri-watch starts.