![background image](http://html1.mh-extra.com/html/icom/ic-m90/ic-m90_instruction-manual_2038048019.webp)
13
5
SCAN OPERATION
5
■
Setting tag channels
For more efficient scanning, add desired channels as tag
channels or clear the tag for unwanted channels.
Non-tag channels will be skipped during scanning.
q
Select the desired channel to set as a tag channel.
w
Push both [
Y
] and [
Z
] for 1 sec. to set the displayed
channel as a tag channel.
•
“
” appears in the function display.
e
To cancel the tag channel setting, push both [
Y
] and [
Z
]
for 1 sec.
•
“
” disappears.
✔
Clearing all tag channels in the selected channel group
While pushing and holding both [
Y
] and [
Z
], turn power ON
to clear all tag channels in the channel group.
■
Starting a scan
Set the weather alert function, priority scan function, scan
resume timer and auto scan function in advance, using the
SET mode. (pgs. 17, 18)
q
Select the desired channel group (USA, CAN, INT) by
pushing
[CH/WX•
U/I/C/L
] for 1 sec.
, if desired.
•
When the weather alert function is in use, select the desired
weather channel with [CH/WX•
U/I/C/L
] and [
Y
]/[
Z
].
w
Push
[SCAN•
DUAL
]
to start priority or normal scan.
• “SCAN” blinks in the function display.
• “16” appears on the sub channel readout during priority scan.
•
When a signal is received, scan pauses until the signal dis-
appears or resumes after pausing 5 sec. according to scan
resume timer setting. (Channel 16 is still monitored during prior-
ity scan.)
•
Push [
Y
]/[
Z
] to check the scanning tag channels, change the
scanning direction or resume the scan manually.
e
To stop the scan, push
[SCAN•
DUAL
]
.
•
“SCAN”
disappears.
• Pushing [PTT], [16•
9
] or [CH/WX•
U/I/C/L
] also stops the scan.
[Example]:
Starting a normal scan.
Scan starts.
Push
to stop the scan
Receiving a signal
and audio is emitted.
for 1 sec.
Push