Modifications
Delete published procedure for Group Calls starting On Page 94
Insert:
Group DSC Call Procedure:
1.
Press [DSC] button to go to the
DSC WATCH
display.
2.
Press [
SET
/MODE] button to go to the
DSC MENU
.
3.
NOTE
: Press [
SET
/MODE] button at any time to cancel the procedure and [FREQ/CH]
button to move back one menu screen.
4.
Rotate [CH] knob to select
Group
5.
Press [ENT] button to display
Group
– Group ID
menu
6.
Select what Group the message will be sent to or
input a Group MMSI number.
a.
Group Ids always start with a “0”
b.
IF
there are Group addresses pre-
programmed into radio
i.
Rotate the [CH] knob to select the
recipients Group MMSI.
ii.
Press [ENT] button to continue to the
Group
–
Traffic frequency
menu.
c.
IF
no ID numbers are programmed or
manual entry was selected
i.
Manually enter the desired nine digit
Group MMSI number via the numeric
key pad starting with a “0”.
ii.
Press [ENT] button to continue to the
Group
–
Traffic frequency
menu.
