![background image](http://html.mh-extra.com/html/icom/ic-m506/ic-m506_instruction-manual_612830111.webp)
102
12
CONNECTIONS AND MAINTENANCE
NOTE for NMEA In/Out and AF Out leads:
The connectors are attached to keep the leads together.
Before connecting to a piece of equipment, you should cut
the leads to remove the connector.
t
DC POWER CONNECTOR
Connects to a 13.8 V DC power source.
CAUTION:
After connecting the DC power cable, NMEA
leads, external speaker leads and Hailer leads, cover the
connector and leads with an adhesive tape, as shown be-
low, to prevent water seeping into the connection.
Rubber vulcanizing
tape
y
NMEA 2000 CONNECTOR
Connects to the NMEA 2000 network*.
*
Some versions of IC-M506 do not have a NMEA 2000
connec-
tor.
u
COMMAND MICROPHONE JACK
Connects to the optional Command microphone. (p. 107)
D
Connect to the MA-500TR
Connect the transceiver to the high-density D-Sub 15-pin
connector of the MA-500TR using the OPC-2014* cable. Af-
ter connecting, an Individual DSC call can be made to the
AIS target using the transponder without entering the target’s
MMSI code.
* The OPC-2014 is supplied with the MA-500TR
• Listener A (Data-H) lead (Yellow):
Connects to lead 3 of the OPC-2014.
• Listener B (Data-L) lead (Green):
Connects to lead 2 of the OPC-2014.
• Talker A (Data-H) lead (White):
Connects to lead 5 of the OPC-2014.
• Talker B (Data-L) lead (Brown):
Connects to lead 4 of the OPC-2014.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Summary of Contents for IC-M506
Page 122: ......