11
4
SET MODE
■
Entering SET mode
SET mode is used to customize operation of the transceiver
to suit your operating needs.
D
To enter SET mode:
➀
While pushing [16], turn power ON.
• Keep pushing [16] until the initial SET mode display appears.
• SET mode is selected.
➁
To exit SET mode, turn power OFF then ON again.
D
To select an item:
There are 5 items in SET mode that may be adjusted to suit
your operating needs.
➀
Select SET mode as above.
➁
Push [16] to select an item; then push [UP]/[DN] to set the
condition for the item.
■
SET mode items
Beep tones (p. 12)
Normal/priority
scan (p. 12)
*
1
*
2
Weather alert (p. 12)
Scan timer (p. 12)
Dual/tri-watch (p. 12)
Select a
SET mode
item*
2
Select a
SET mode
condition*
1
16
U
DN
P
*
1
*
2
*
1
*
2
*
1
*
1
*
2
*
1
*
2
*
1
*
2
*
1
*
2
*
1
*
1
*
1
*
2
SET mode items above are shown at their
default conditions.
