10
3
BASIC OPERATION
■
Call channel programming
Pushing [
16
• 9] for 1 sec. selects the call channel, channel 9
by default, however you can program your most often-used
channels in each channel group for quick recall.
➀
While push and hold [H/L]
push [CH/WX] one or more
times to select the desired
channel group (USA, CAN,
INT) to be programmed.
➁
Push [
16
• 9] for 1 sec. to se-
lect the call channel of the se-
lected group.
• “CALL” and the call channel
number appear.
➂
Push [
16
• 9] for 3 sec. to enter
call channel write mode.
• Call channel and channel group
to be programmed flash.
➃
Push [UP] or [DN] to select
the desired channel.
USA
CALL
USA
TAG
CALL
USA
CALL
USA
➄
Push any switch to automati-
cally program the selected
channel.
• The transceiver returns to normal operation.
■
Display backlighting
The function display and switches can be backlit for better
visibility under low light conditions.
While pushing [
H/L
• DIM], push [UP] or [DN] to adjust the
backlighting.
• Backlighting can be set to 1 of 4 intensities or turned OFF.
CALL
USA
