1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A-7022D-2EX
Printed in Japan
© 2012 Icom Inc.
Transmitting a Test Call
D
Enter “TEST CALL” in the DSC CALLS menu.
q
Select or enter the desired individual address.
w
A confirmation screen appears.
e
Push [CALL] to transmit the Test call.
r
When the acknowledgement call is received, beeps sound.
t
Push [ALARM OFF] to stop the beeps, and then push [EXIT]
y
to return to the normal operating mode.
Transmitting a Test Acknowledgement Call
D
Quick ACK:
When
q
a Test call is received, beeps sound.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
• Push [INFO] to display the Test call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Test ACK confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
After transmitting the acknowledgement call, the transceiver
r
returns to the normal operating mode.
Manual ACK:
Enter “TEST ACK” in the DSC CALLS menu.
q
• If no Test call has been received, the “TEST ACK” item will not
be displayed.
Select a desired Test call to reply to, using Dial or [
w
∫
]/[
√
],
then push Dial or [ENT].
The Test ACK confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
After transmitting the acknowledgement call, the transceiver
r
returns to the normal operating mode.
Transmitting a Position Reply Call
D
Quick Reply:
When
q
a Position Request call is received, beeps sound.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
• Push [INFO] to display the Position Request call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Position Reply confirmation screen is displayed.
e
Push [CALL] to transmit the reply call.
After transmitting the reply call, the transceiver returns to the
r
normal operating mode.
Manual Reply:
Enter “POSITION REPLY” in the DSC CALLS menu.
q
• If no Position Request call has been received, the “POSITION
REPLY” item will not be displayed.
Select a desired Position Request call to reply to.
w
The Position Reply call confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
After transmitting the reply call, the transceiver returns to the
r
normal operating mode.
Transmitting a Position Report Reply Call
D
Quick Reply:
When
q
a Position Report Request call is received, beeps
sound.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
• Push [INFO] to display the Position Report Request call infor
-
mation.
Push [BACK] to return to the previous screen, or push [ACK].
The Position Report Reply confirmation screen is displayed.
e
Push [CALL] to transmit the reply call.
After transmitting the reply call, the transceiver returns to the
r
normal operating mode.
Manual Reply:
q
Enter “POSITION REPORT REPLY” in the DSC CALLS
menu.
• If no Position Report Request call has been received, the “PO
-
SITION REPORT REPLY” item will not be displayed.
Select a desired Position Report Request call to reply to, us
-
w
ing Dial or [
∫
]/[
√
], then push Dial or [ENT].
The Position Report Reply call confirmation screen is dis
-
e
played.
Push [CALL] to transmit the acknowledgement call.
After transmitting the reply call, the transceiver returns to the
r
normal operating mode.
Transmitting a Polling Reply Call
D
Quick Reply:
When
q
a Polling Request call is received, beeps sound.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
• Push [INFO] to display the Polling Request call information.
Push [BACK] to return to the previous screen, or push [ACK].
The
e
Polling
Reply confirmation screen is displayed.
Push [CALL] to transmit the reply call.
After transmitting the reply call, the transceiver returns to the
r
normal operating mode.
Manual Reply:
Enter
q
“POLLING REPLY” in the DSC CALLS menu.
• If no Polling Request call has been received, the “POLLING
REPLY” item will not be displayed.
Select a desired Polling Request call to be replied.
w
e
The Polling Reply call confirmation screen is displayed. Push
[CALL] to transmit the acknowledgement call.
After transmitting the reply call, the transceiver returns to the
r
normal operating mode.
¤1
Transmitting DSC calls
To ensure correct operation of the DSC function, make sure
you set the squelch correctly.
Transmitting an Individual Call
D
Enter “INDIVIDUAL CALL” in the DSC CALLS menu.
q
Select or enter the desired individual address.
w
Select Routine, Safety or Urgency as the desired call type.
e
NOTE:
When a coast station is selected in step
w
, the voice
channel is automatically specified by the coast station.
Therefore, skip step
r
and go directly to step
t
.
Select a desired intership channel.
r
A confirmation screen appears.
t
Push [CALL] to transmit the Individual call.
y
Standby on Channel 70 until an acknowledgement is re
-
u
ceived.
When the acknowledgement ‘Able to comply’ is received,
i
beeps sound and the screen below is displayed.
Push [ALARM OFF] to stop the beeps, and then select the
intership channel specified in step
r
.
• A different intership channel will be automatically selected if the
station you called cannot use the channel.
• Reply using the microphone. And go to step
o
.
Or, when the acknowledgement ‘Unable to comply’ is re
-
ceived, beeps sound.
Push [ALARM OFF] to stop the beeps. Then push [EXIT]
to return to the operating channel (before you entered the
MENU screen).
After communicating, push [EXIT] to return to the normal op
-
o
erating mode.
Transmitting an Individual Acknowledgement
D
Quick ACK:
When
q
an Individual call is received, beeps sound.
Push [ALARM OFF] to stop the beeps.
Push [ACK].
w
Select one of three options, Able to Comply, Unable to Com
-
e
ply or Propose New Channel, and then push [ENT].
The Individual ACK confirmation screen is displayed.
r
Push [CALL] to transmit the acknowledgement call.
t
Reply to the call using the microphone.
y
Push [EXIT] to return to the normal operating mode.
u
Manual ACK:
Enter “INDIVIDUAL ACK” in the DSC CALLS menu.
q
• When no Individual call has been received, the “Individual ACK”
item will not be displayed.
Select a desired individual address or ID code to reply to,
w
using Dial or [
∫
]/[
√
], then push [ENT].
Perform steps
e
e
to
u
, as described in “Quick ACK:” above.
Transmitting a Group Call
D
Enter “GROUP CALL” in the DSC CALLS menu.
q
Select or enter the desired group address.
w
Select a desired intership channel.
e
A confirmation screen appears.
r
Push [CALL] to transmit the Group call.
t
Announce the information using the microphone.
y
After the announcement, push [EXIT] to return to the normal
u
operating mode.
Transmitting an All Ships Call
D
Enter “ALL SHIPS CALL” in the DSC CALLS menu.
q
Select a desired category.
w
• The selectable category may differ according to the connected
transceiver setting.
Select a desired traffic channel.
e
A confirmation screen appears.
r
Push [CALL] to transmit the All Ships call.
t
Announce the message using the microphone.
y
After the announcement, push [EXIT] to return to the normal
u
operating mode.
Transmitting a Position Request Call
D
Enter “POSITION REQUEST” in the DSC CALLS menu.
q
Select or enter the desired individual address.
w
A confirmation screen appears.
e
• Confirm the call contents.
Push [CALL] to transmit the Position Request Call.
r
• If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
When the acknowledgement call is received, beeps sound.
t
Push [ALARM OFF] to stop the beeps, and then push [EXIT]
y
to return to the normal operating mode.
Transmitting a Position Report Call
D
Enter “POSITION REPORT” in the DSC CALLS menu.
q
Select or enter the desired individual address.
w
A confirmation screen appears.
e
• Confirm the call contents.
Push [CALL] to transmit the Position Report Call.
r
• If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
After the Position Report Call has been transmitted, the trans
-
t
ceiver automatically returns to the normal operating mode.
Transmitting a Polling Request Call
D
Enter “POLLING REQUEST” in the DSC CALLS menu.
q
Select or enter the desired individual address.
w
A confirmation screen appears.
e
• Confirm the call contents.
Push [CALL] to transmit the Polling Request Call.
r
• If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
When the acknowledgement call is received, beeps sound.
t
Push [ALARM OFF] to stop the beeps, and then push [EXIT]
y
to return to the normal operating mode.
+
See “Instructions
q
”
(
z
to
⁄5
)
or “Instructions
e
”
(
¤2
to
‹0
)
for other functions.
¤1
Transmitting DSC calls (Continued)