REMOTE-CONTROL MICROPHONE
HM-195B
HM-195SW
INSTRUCTIONS
w
⁄6
Programming Individual/Group ID
Enter “INDIVIDUAL ID” or “GROUP ID” in the DSC SET-
q
TINGS menu.
Push [ADD].
w
• The “INDIVIDUAL ID” or “GROUP ID” program screen is dis
-
played.
Enter a desired ID in the following way:
e
• Select a desired number using Dial, or [
∫
]/[
√
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
The first digit is specified as ‘0’ for a Group ID.
The first two digits are ‘0’ for any Coast station ID.
Repeat step
r
e
to enter all 9 digits.
After entering, push [ENT] or Dial to set it.
t
• The ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following way:
y
• Select a desired character using Dial, or [
∫
]/[
√
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• Push [123] then [!$?] then [ABC] to select a character group.
After entering the ID name, select “FINISH” using Dial, or
u
[
∫
]/[
√
]/[
Ω
]/[
≈
], then push [ENT] or Dial to program it.
• The “INDIVIDUAL ID” or “GROUP ID” list screen is displayed.
Push [MENU] to exit the MENU screen.
i
⁄8
Position and time programming
Enter “POSITION INPUT” in the DSC SETTINGS menu.
q
Edit your latitude and longitude position using Dial, or [
w
∫
]/
[
√
]/[
Ω
]/[
≈
].
• Select a desired number using Dial, or [
∫
]/[
√
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• Select N (North latitude) or S (South latitude) when the cursor
is on the ‘N’ or ‘S’ position.
• Select W (West longitude) or E (East longitude) when the cur
-
sor is on the ‘W’ or ‘E’ position.
After entering the position, push [ENT] to program it.
e
The UTC time programming screen is displayed, enter the
r
UTC time in the following way:
• Select a desired number using Dial, or [
∫
]/[
√
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
Push [ENT] or Dial to program your position and time.
t
• Return to the “DSC SETTING” screen.
⁄7
Deleting Individual/Group ID
Enter “INDIVIDUAL ID” or “GROUP ID” in the DSC SET-
q
TINGS menu.
• When no address ID is programmed, “No ID” is displayed. In
this case, push [MENU] to exit the MENU screen.
Rotate Dial or push [
w
∫
]/[
√
] to select a desired ID name,
then push [DEL].
Push [OK] to delete the ID, and return to the “INDIVIDUAL
e
ID” or “GROUP ID” list screen.
• Push [CANCEL] to cancel it.
Push [MENU] to exit the MENU screen.
r
⁄9
Distress Call
The Distress call is automatically transmitted every 3.5 to
4.5 minutes, until an acknowledgement is received (‘Call re
-
peat’ mode), or a DSC Cancel call is made (See
¤0
).
Simple Call
D
Confirm no Distress call is being received.
q
While lifting up the key cover, hold down [DISTRESS] for 3
w
seconds to transmit the Distress call.
• While holding down [DISTRESS], count down beeps sound
and both the key and display backlighting blink.
• DSC channel (Channel 70) is automatically selected and the
Distress call is transmitted.
After transmitting the call, the transceiver waits for an ac
-
e
knowledgment call.
• Push [RESEND] to manually transmit the Distress repeat call.
• Push [
Ω
]/[
≈
] then push [INFO] to display the transmitted Dis
-
tress call information.
• Push [
Ω
]/[
≈
] then push [PAUSE] to pause the ‘Call repeat’
mode; push [RESUME] to resume it.
After receiving the acknowledgment, push [ALARM OFF]
r
then reply using the microphone.
A distress alert default contains:
➥
• Nature of distress : Undesignated distress
• Position information : The latest GPS or manual input position
is held for 23.5 hours, or until the power
is turned OFF.
Regular Call
D
Enter “DISTRESS CALL” in the DSC CALLS menu.
q
Select the nature of the distress using Dial or [
w
∫
]/[
√
], then
push Dial or [ENT].
• ‘Undesignated,’ ‘Fire,’ ‘Explosion,’ ‘Flooding,’ ‘Collision,’ ‘Ground
-
ing,’ ‘Capsizing,’ ‘Sinking,’ ‘Adrift,’ ‘Abandoning ship,’ ‘Piracy’ or
‘Man Overboard’ is selectable.
• The nature of the distress is stored for 10 minutes after a se
-
lection is made.
The Distress call confirmation screen is displayed.
e
• Rotate Dial or push [
Y
]/[
Z
] to see the hidden lines.
Hold down [DISTRESS] for 3 seconds to transmit the Dis
-
r
tress call.
• While holding down [DISTRESS], count down beeps sound
and both the key and display backlighting blink.
• The selected nature of the distress is stored for 10 minutes.
After transmitting the call, the transceiver waits for an ac
-
t
knowledgment call.
• Push [RESEND] to manually transmit the Distress repeat call.
• Push [
Ω
]/[
≈
] then push [INFO] to display the transmitted Dis
-
tress call information.
• Push [
Ω
]/[
≈
] then push [PAUSE] to pause the ‘Call repeat’
mode, push [RESUME] to resume it.
After receiving an acknowledgment call, push [ALARM
y
OFF], then reply using the microphone.
A distress alert contains:
➥
• Nature of distress : Selected in step
w
.
• Position information : The latest GPS or manual input position
is held for 23.5 hours, or until the power
is turned OFF.
When no GPS receiver is connected, and both position
and time have been manually programmed, the screen
shown below appears. Edit your latitude and longitude
position and UTC time as follows:
Push [CHG], then edit your latitude and longitude posi
-
➥
tion and UTC time.
• Select a desired number using Dial, or [
∫
]/[
√
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then
push [ENT] or Dial.
• Select N (North latitude) or S (South latitude) when the
cursor is on the ‘N’ or ‘S’ position.
• Select W (West longitude) or E (East longitude) when the
cursor is on the ‘W’ or ‘E’ position.
¤0
Distress Cancel Call
While waiting for an acknowledgment call, push [CANCEL].
q
Push [CONTINUE].
w
• Push [BACK] to return to waiting for an acknowledgement call.
Push [FINISH].
e
• Push [EXIT] to return to waiting for an acknowledgement call.
The Distress cancel call is transmitted.
r
Channel 16 is automatically selected.
t
• Report your situation using the microphone.
• After the report, push [EXIT] to return to the normal operating
mode.