manualshive.com logo in svg

Icom IC-M302, Instruction Manual

Share
Download
Icom IC-M302 Instruction Manual Download Page 40

34

8

CONNECTIONS AND MAINTENANCE

New2001

■

Optional MB-69 installation

An optional MB-69 

FLUSH MOUNT

is available for mounting the

transceiver to a flat surface such as an instrument panel.

CAUTION: KEEP

the transceiver and microphone at least

1 meter away from your vessel’s magnetic navigation com-
pass.

q

Using the template on p. 39, carefully cut a hole into the
instrument panel (or wherever you plan to mount the trans-
ceiver.)

w

Slide the transceiver through the hole as shown below. 

e

Attach the clamps on either side of the transceiver with 2
supplied bolts (5 

×

8 mm).

• Make sure that the clamps align parallel to the transceiver body.

r

Tighten the end bolts on the clamps (rotate clockwise) so
that the clamps press firmly against the inside of the in-
strument control panel.

t

Tighten the locking nuts (rotate counterclockwise) so that
the transceiver is securely mounted in position as below.

y

Connect the antenna and power cable, then return the in-
strument control panel to its original place.

!IC-M302-1.qxd  03.10.27 9:07 AM  Page 34 (1,1)

Summary of Contents for IC-M302

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands