manualshive.com logo in svg

Icom IC-M302, Instruction Manual

Share
Download
Icom IC-M302 Instruction Manual Download Page 39

33

8

CONNECTIONS AND MAINTENANCE

New2001

8

■

Mounting the transceiver

ï

ï

Using the supplied mounting bracket

The universal mounting bracket supplied with your transceiver
allows overhead or dashboard mounting.

• Mount the transceiver securely with the 2 supplied screws

(5 

×

20) to a surface which is more than 10 mm thick and

can support more than 5 kg.

• Mount the transceiver so that the face of the transceiver is at

90° to your line of sight when operating it.

CAUTION: KEEP

the transceiver and microphone at least

1 meter away from your vessel’s magnetic navigation com-
pass.

NOTE:

Check the installation angle; the function display

may not be easy-to-read at some angles.

■

Optional MB-92 attachment

An optional MB-92 

DUST COVER

is available for attaching the

transceiver’s front panel to prevent the keys and knobs get-
ting wet when the transceiver is not used.

➥

Attach the optional MB-92 

DUST COVER

to the transceiver

as shown below.

EXAMPLE

!IC-M302-1.qxd  03.10.27 9:07 AM  Page 33 (1,1)

Summary of Contents for IC-M302

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands