![background image](http://html.mh-extra.com/html/icom/ic-m23/ic-m23_instruction-manual_612745032.webp)
26
TROUBLESHOOTING
9
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
The transceiver does not turn
ON.
• The battery is exhausted.
• The battery pack is not correctly in-
serted.
• Recharge the battery pack.
• Correctly insert the battery pack.
p. 23
p. 3
No sound from speaker.
• The squelch level is too high.
• Volume level is too low.
• Speaker has been exposed to water.
• Set the squelch level to the threshold level.
• Adjust the audio level to a suitable level.
• Remove water from the speaker grill.
p. 10
p. 10
p. 13
Transmitting is impossible,
or high power can not be se-
lected.
• Some channels are limited to low power
or only receive.
• The output power is set to low.
• The battery is exhausted.
• Change the channel.
• Push
[Hi/Lo]
to select high power.
• Recharge the battery pack.
pp. 8,
9, 27
p. 11
p. 23
The displayed channel cannot
be changed.
• The Lock function is activated.
• Hold down
[
]
(Hi/Lo) for 1 second to
turn OFF the function.
p. 13
Scan does not start
• “TAG” channels are not programmed.
• Set desired channels as “TAG” channels.
p. 15
No beep sounds.
• Beep Tone function is turned OFF.
• Turn ON the Beep Tone in the set mode. p. 18