manualshive.com logo in svg

Icom IC-M23, Instruction Manual

Share
Download
Icom IC-M23 Instruction Manual Download Page 29

23

8

BATTERY CHARGING

1

2

3

4

5

6

7

8
9

10

11

12

13

14

15

16

■

 Supplied battery charger

D

 Charging

Do not use a charger other than the specifi ed one.

q 

Turn OFF the transceiver's power.

w 

Connect the charger as shown below.

 • 

 

“

” appears, and the battery icon scrolls while charging.

e 

 The charging is completed in approximately 8.5 hours, 
depending on the remaining capacity before charging.

 • 

 

“

” and “

” appear, and “FL” is also displayed on the 

function display when charging is completed.

Charger*

[DC] jack

Power OFF

BP-266

BP-266

BP-266

*Not supplied or different types are supplied, depending on the version.

NOTE:

 “

” and “

” blink, and “Er” is also displayed on 

the function display, when the battery pack is not attached.

■

 Optional battery charger

Do not place the charger on a surface with any vibration. 
Otherwise the batter y pack might come out of the 
charger, or the charger itself might fall.

D

 AD-123 installation

The AD-123 

CHARGER

 

ADAPTER

 must be installed into the 

BC-119N 

DESKTOP

 

CHARGER

 or BC-121N 

MULTI

-

CHARGER

 

before charging.

q

  Connect the AD-123 and the BC-119N or BC-121N as 

shown.

BP-266

BP-266

BP-266

AD-123

BP-266

BP-266

Plugs

Sockets

This illustration is for the BC-119N.

BP-266

Summary of Contents for IC-M23





































Reviews:

No comments

Brands by name

Popular brands

Load more brands