![background image](http://html.mh-extra.com/html/icom/ic-m21/ic-m21_service-manual_612741022.webp)
7 - 2
MP1 (C)
SP1 (C)
NOTE2
R500 (V)
MP10 (C)
NOTE1
NOTE4
MP4 (C)
MP15 (C)
MP11 (C)
MP12 (C)
MP6 (C)
NOTE3
MP7 (C)
NOTE3
W1 (C)
MP8 (C)
MP9 (C)
MP54 (M)
([M2A] only)
MP5 (C)
NOTE2
MP361 (M)
DS360 (M)
MP360 (M)
EP360 (M)
J31 (C)
NOTE1
MP31 (C)
MP42 (C)
MP42 (C)
MP37 (C)
MP35 (C)
MP33 (C)
MP36 (C)
MP362 (M)
MP39 (C)
MP39 (C)
MP39 (C)
MP39 (C)
MP38 (C)
MP34 (C)
MP14 (C)
NOTE1
MP32 (C)
MP40 (C)
MP41 (C)
MP21 (C)
MP22 (C)
MP23 (C)
MP24 (C)
MP25 (C)
NOTE1
MP23 (C)
MP23 (C)
Speaker
Window
Plate
MP7
MP6
8-key
Front side
Rear side
Rear view of the front panel
VR unit
MP2 (C)
NOTE2
MAIN unit
UNIT abbreviations (C): CHASSIS PARTS, (M): MAIN UNIT, (V): VR UNIT
NOTE1
Once the following parts are removed, a O ring or sealing must be replaced
with new one before reattachement.
Mother part . . . . . . . . . . . . . . . . . . Daughter part for relayted replacement
J31 (C) Antenna connector . . . . . . MP14 (C) Sealing washer
VR unit . . . . . . . . . . . . . . . . . . . . . MP10 (C) O ring
MP24 (C) Screw . . . . . . . . . . . . . . MP25 (C) Sealing washer
NOTE2
The glue must be applied to the
areas when the front panel is
replaced with new one, to ensure
water tightness.
Manufacture : Semedain Co.
Type
: Super-X
NOTE3
Once the 2497 PTT button (MP6 (C)) or
the 2497 PTT holder is removed, the
glue must be applied between the 2497
PTT button or the 2497 PTT holder when
is removed and 2497 front panel when
2497 button is removed.
NOTE4
Silicone grease is applied to
area.