![background image](http://html.mh-extra.com/html/icom/ic-m200/ic-m200_instruction-manual_612739020.webp)
17
8
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
Power does not come
on when turning ON the
transceiver.
Power cable is improperly
connected.
Reconnect the DC power cable
correctly.
No sound is heard from the
speaker.
Volume level is too low.
Rotate [VOL] to a suitable listening
level.
Speaker has been exposed to
water.
Drain water from the speaker.
Squelch level is too high.
Set squelch to the threshold point. p. 6
Cannot transmit or output
power is low.
Channels that are only for receive
or low power are selected.
Select other channels.
Low power is selected.
Push [HI/LO] on the microphone to
select high power.
Scan does not start.
“TAG” channels are not set.
Set the channels you want to scan
as “TAG” channels.
No beeps.
Key beeps are OFF.
Turn ON the key beep in the Set
mode.