D
Turning power ON
z
Rotate
[VOL]
clockwise to turn ON the power.
D
Receiving and Transmitting
Receiving:
1. Set the operating frequency.
•
In the VFO mode:
Enter the operating frequency on the key pad,
or push
[UP]/[DOWN]
to change the frequency.
•
In the Memory mode:
Enter the Memory channel number on the key pad,
or push
[UP]/[DOWN]
to change the channel.
L
You can select a Favorite channel (1~16) by rotating
[ROTARY SELECTOR]
, if programmed.
2. When a call is received, rotate
[VOL]
to adjust the
audio output level to a comfortable listening level.
Transmitting:
Wait until the frequency is clear to avoid interference.
1. Hold down
[PTT]
speak at your normal voice level.
2. Release
[PTT]
to receive.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A7450D-2EX
Printed in Japan
© 2018 Icom Inc.
q
u
t y
r
w e
!0
o
i
q
SIGNAL STRENGTH INDICATOR
Displays the relative receive signal strength.
w
LOW POWER ICON
Displayed when low output power (L1 or L2) is selected.
e
AUDIBLE ICON
Displayed while in the ‘Audible’ (unmuted) mode.
r
COMPANDER ICON
Displayed when the Compander function is ON.
t
SCRAMBLER ICON
Displayed when the Voice Scrambler function is ON.
FUNCTION DISPLAY
BASIC OPERATION
y
POCKET BEEP ICON
•
Displayed when the Pocket Beep function (with CTCSS
or DTCS) is ON.
• Blinks after receiving a signal that includes a matching
tone or code.
u
SCAN ICON
•
Displayed when a Scan-tagged channel is selected.
•
Blinks during a scan.
i
KEY LOCK ICON
Displayed when the Key Lock function is ON.
o
BATTERY INDICATOR
• Displays the remaining battery charge.
• Blinks when the battery should be charged.
!0
ALPHANUMERIC READOUT
Displays messages such as the operating frequency,
channel name, Set mode item and so on.
CAUTION:
Transmitting without an antenna may damage the
transceiver.
TIP:
To maximize the readability of your transmitted
signal, pause for a second after pushing [PTT] and
hold the microphone 5 to 10 cm (2 to 4 inches) from
your mouth.
NOTE:
Before using the transceiver for the first time,
the battery pack must be fully charged for optimum
life and operation. See
BATTERY CHARGING
de-
scribed in INSTRUCTIONS
q
.
[UP]
[PTT]
Microphone
[DOWN]
[VOL]
[ROTARY
SELECTOR]
Function
Display
Key pad
