![background image](http://html.mh-extra.com/html/icom/ic-g86/ic-g86_advanced-manual_612690040.webp)
11
OPTIONS
11-3
Optional battery case (BP-263)
When using the battery case (BP-263), install 6 × AA
(LR6) size alkaline batteries, as described below.
1. Remove the battery case, if it is attached.
L
The procedure of removing the battery case is
same as the battery pack. (p. 1-3)
2.
Install 6 × AA (LR6) size alkaline batteries.
L
Install only alkaline batteries.
L
Be sure to observe the correct polarity.
3. Attach the battery case.
L
The procedure of attaching the battery case is
same as the battery pack. (p. 1-3)
R
WARNING!:
• Never incinerate used battery cells since the
internal battery gas may cause them to rupture.
• Never expose a detached battery case to water.
If the battery case gets wet, be sure to wipe it dry
before using it.
CAUTION:
• When installing batteries, make sure they are all
the same brand, type and capacity. Also, do not
mix new and old batteries together.
• Keep battery terminals clean. It’s a good idea to
occasionally clean them.
• Never use batteries whose insulated covering is
damaged.
CAUTION:
When the battery case is attached, the
Battery Protection function must be turned OFF in
the Initial Set mode. (p. 8-7)
BE CAREFUL!
The negative
terminals of the battery case
protrude from the body, so
pay attention not to injure your
fingers when inserting the
batteries.