![background image](http://html2.mh-extra.com/html/icom/ic-f9011/ic-f9011_instruction-manual_3579667030.webp)
25
7
OPTIONS
D
About VS-1MC
vox
/
ptt
case
(Continued)
VOX gain and delay adjustment
q
Attach the connector of the VS-1MC into the multi-connec-
tor on the transceiver and tighten the screw.
• Toggle the VOX/PTT select switch to [VOX].
w
Enter user set mode. (p. 14)
e
Push [
Ω
] several times to select the “VOX Gain” or “VOX
Delay” items. Then, push [
∫
] or [
√
] to set the desired
level/condition.
r
Push and hold [
Ω
] again to exit the user set mode.
• Until turning power OFF, [
Ω
], [
∫
] and [
√
] is not activated as the
assigned key function.
These adjustments are for Simple/10-key types only.
• VOX Gain
The VOX sensitivity level can be adjusted from OFF or 1 to 6
(more sensitive).
VOX GAIN 3
MON CLCK ZONE
VOX OFF
MON CLCK ZONE
Push
[
∫
]
or
[
√
]
VOX function is OFF
VOX gain level 3
(default)
• VOX Delay
The VOX delay time can be set from 0.5 to 3.0 sec. (0.5 sec.
step) for a convenient interval before returning to receive.
VOX DLY3.0
MON CLCK ZONE
VOX DLY0.5
MON CLCK ZONE
0.5 sec (min.)
(default)
3.0 sec (max.)
Push
[
∫
]
or
[
√
]
If your voice is detected, “TX” appears on the LCD as
shown below during the VOX gain or VOX delay adjust-
ment. (The transmission is not performed.)
VOX GAIN 3TX
MON CLCK ZONE
VOX DLY3.0TX
MON CLCK ZONE
Appear
VOX gain adjustment
VOX delay adjustment
NOTE:
MIC/VOX gain can be adjusted via the Adjusting
pot using a thin screw driver.