![background image](http://html.mh-extra.com/html/icom/ic-f8100/ic-f8100_service-manual_612673029.webp)
5-10
ADJUSTMENT
TRANSCEIVER’S
CONDITION
OPERATION
ADJUSTMENT
ITEM
VALUE
ALC
CURRENT
1 • Channel: 25
• Mode:
CW
• Receiving
• Test equipment
1) Connect the test equipment to
the antenna connector.
2) Connect an ammeter between
the transceiver and the power
supply.
3) C o n n e c t t h e c h e ck p o i n t
“FOR” on the PA-A UNIT to
the ground.
NOTE
: Adjust this adjustment
i t e m s a s q u i c k l y a s
possible.
(Confi g Menu)*
"RF Power"
"HIGH"
2
Simple 21/30
(Factory Menu)
"ICCV"
"0"
3
Simple 24/30
(Factory Menu)
"TX High Power"
"255"
4 • Transmitting
Simple 21/30
(Factory Menu)
"ICCV"
27.5 A
5
Simple 24/30
(Factory Menu)
“TX High Power”
"0"
5-3 TRANSMIT ADJUSTMENTS (Continued)
*; Enter the Confi g Menu as shown below.
1) Push
[ ]
to return to the Main Menu.
2) Select “Setmode” and push
[
]
to enter, and then select “Confi g” using
[
]
/
[
]
.
3) Select “RF Power,” and then set the TX power.
4) Return to the Factory Menu to continue the adjustment.
• ADJUSTMENT POINT ON THE PA-A UNIT
ALC CURRENT
CHECK POINT
(FOR)