![background image](http://html.mh-extra.com/html/icom/ic-f8100/ic-f8100_service-manual_612673022.webp)
5-3
M
ENTERING ADJUSTMENT MODE
1) Turn OFF the transceiver power, if the transceiver is powered ON.
2) While holding down
[#]
,
[
]
,
[
]
and
[
]
, hold down
[
]
to turn ON the transceiver power.
• The login screen appears as below.
3) Enter the password “SX-3500,” and then push
[
]
.
Select a Menu.
Main Menu
Return to the Main Menu.
Enter the selected Menu.
Enter the Factory Menu.
Enter the selected adjustment group.
Enter “SX-3500” as below.
Deletes the selected character.
1) Push
[7 PRS]
(CLAR)
3 times
to enter “
S
.”
2) Push
[9 WXY]
2 times
to enter “
X
.”
3) Push
[* @?]
(MUTE)
21 times
to enter “
–
.”
4) Push
[3 DEF]
(MODE)
4 times
to enter “
3
.”
5) Push
[5 JKL]
4 times
to enter “
5
.”
6) Push
[0]
(DISP)
4 times
to enter
“
0
,” and then push
[
]
.
7) Push
[0]
(DISP)
4 times
to enter “
0
.”
Selects the next digit.
Selects the previous digit.
j
4) Hold down
[ ]
for 1 second to enter the Main Menu.
5) Select “Setmode.”
6) Select “Factory.”
7) Select either “Simple,” “Detail,” or “Design” to adjust an item, as described below.
• Select “User Menu” to see the transceiver’s settings.
Simple:
RX ADJUSTMENT, RX 1ST MIXER, RX IF, RF GAIN, S-METER, REFERENCE FREQUENCY, IDLING, CM COUPLER,
TX IF, ALC CURRENT, TX POWER (CW mode)
Detail: TX POWER (AM mode), (DATA)
Design: PO METER, TX SENSITIVITY, LOW VOLTAGE APC, POWER OFF V