![background image](http://html1.mh-extra.com/html/icom/ic-f70t/ic-f70t_instruction-manual_4291907014.webp)
10
2
PANEL DESCRIPTION
ID-MR SELECT KEY
“
IDMS
”
(PMR or BIIS PMR operation only)
➥
Recalls detected ID codes.
• Push this key, then select the ID code using [CH Up]/[CH Down].
• Up to 5 ID’s are memorized.
➥
Push and hold to erase the selected ID’s.
SCRAMBLER FUNCTION
“
SCR
”
Push to toggle the voice scrambler function ON and OFF.
COMPANDER KEY
“
COMP
”
Push to toggle the compander function ON and OFF.
The compander function reduces noise components from the
transmitted audio to provide clear communication.
USER SET MODE KEY
“
SET
”
➥
Push and hold to enter user set mode.
• During user set mode, push this key to select an item, and
change the value or condition using push [CH Up]/[CH Down].
➥
Push and hold this key again to exit user set mode.
User set mode is also available via the ‘Power ON function.’
Refer to p. 17 also.
OPT OUT KEYS
“
OP1
”/“
OP2
”/“
OP3
”
Push to control the output signal level of the optional ports in
the optional unit connector.
OPT MOMENTARY KEYS
“
01M
”/“
02M
”/“
03M
”
Push and hold to control the output signal level of the option-
al ports in the optional unit connector.
DIGITAL BUTTON KEY
“
BIFN
” (BIIS operation only)
➥
Push to select the call ID list, transmit message and stand-
by condition. Toggles between queue channel and
received message record indication after queue channel is
selected.
➥
Push and hold to select queue channel indication.
STATUS UP/DOWN KEYS
“
BIUP
”/“
BIDN
”
(BIIS operation only)
➥
While in the standby condition, push to display the trans-
mit status indication and select a status number.
➥
When a received SDM is displayed, push to cancel the
automatic scroll and scroll the message manually.
➥
When an SDM that contains more than 12 characters is
displayed, push to scroll the message manually.
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 10 (1,1)