background image

i

EXPLICIT DEFINITIONS

R

WARNING! NEVER

connect the transceiver to an

AC outlet. This may pose a fire hazard or result in an electric
shock.

NEVER

connect the transceiver to a power source of more

than 16 V DC such as a 24 V battery. This connection will ruin
the transceiver.

NEVER

cut the DC power cable between the DC plug and

fuse holder. If an incorrect connection is made after cutting,
the transceiver might be damaged.

NEVER

place the transceiver where normal operation of

the vehicle may be hindered or where it could cause bodily
injury.

NEVER

allow children to touch the transceiver.

NEVER

expose the transceiver to rain, snow or any liquids.

USE

supplied microphone only. Other microphones have

different pin assignments and may damage the transceiver.

DO NOT

use or place the transceiver in areas with tem-

CAUTIONS

WORD

DEFINITION

R

WARNING

Personal injury, fire hazard or electric shock
may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.

READ ALL INSTRUCTIONS

carefully and complete-

ly before using the transceiver.

SAVE THIS INSTRUCTION MANUAL —

This

instruction manual contains important operating instructions for
the 

IC-F521 VHF TRANSCEIVER

and 

IC-F621 UHF TRANSCEIVER.

IMPORTANT

IC-F510F520_F610F620.qxd   02.1.21 10:03 AM  Page b (1,1)

Summary of Contents for IC-F621









Reviews: