![background image](http://html1.mh-extra.com/html/icom/ic-f61m/ic-f61m_instruction-manual_4285966050.webp)
43
9
TROUBLESHOOTING
If your transcever seems to be malfunctonng, please check the fol-
lowng ponts before sendng t to a servce centre.
<Problem> The transceiver's power cannot be turned ON.
<Soluton> • The battery s depleted.
➥
Recharge the battery pack (pgs. 26–32).
• Bad connecton to the battery pack.
➥
Check the connecton to the transcever (p. 2).
<Problem> No sound from the speaker.
<Soluton> • Squelch level s too tght.
➥
Set squelch to the threshold pont n the User set
mode (p. 19).
• Volume level s too low.
➥
Rotate
[VOL]
to set a sutable level (p. 4).
• Water has entered to the
[SP MIC]
jack.
➥
Dry the
[SP MIC]
jack.
<Problem> Transmitting is impossible, or high power cannot be
selected.
<Soluton> • The battery s exhausted.
➥
Recharge the battery pack (pgs. 26–32).
• The battery s overcharged.
➥
Verfy the battery voltage s correct n the User set
mode (p. 19).
• The output power s set to low.
➥
Push
[High/Low]
key to select hgh power (p. 9).
<Problem> The displayed channel cannot be changed.
<Soluton> • Lock functon s actvated.
➥
Push and hold
[LOCK]
key to cancel the functon (p. 8).
<Problem> Scan does not start.
<Soluton> • No channel s programmed n the scan group.
➥
Add the desred channels to scan group (p. 8).
<Problem> No beeps.
<Soluton> • Beep tones are turned OFF.
➥
Set the beep tones to ON n the User set mode (p. 19).