![background image](http://html1.mh-extra.com/html/icom/ic-f61m/ic-f61m_instruction-manual_4285966020.webp)
13
3
BASIC OPERATION
■
Turning power ON
q
Rotate [VOL] to turn power ON.
• When the openng vbraton functon s turned ON, the transcever
vbrates for 2 sec. Ask your dealer for detals.
w
If the transcever s programmed for a start up password, nput
dgt codes as drected by your dealer.
• The keys n the table below can be used for password nput:
• The transcever detects numbers n the same block as dentcal.
Therefore “01234” and “56789” are the same.
KEY
NUMBER
0
5
4
9
3
8
2
7
1
6
or
e
When the “PASSWORD” ndcaton does not clear after nput-
tng 4 dgts, the nput code number may be ncorrect. Turn the
power off and start over n ths case.
■
Channel selection
Several types of channel selectons are avalable. Methods may
dffer dependng on your system set up.
NON-ZONE TYPE:
Push [CH Up]/[CH Down] to select the desred operatng channel
n sequence; or, push one of [MR-CH 1] to [MR-CH 4] to select a
channel drectly.
ZONE TYPE:
Push [Zone] then push [CH Up]/[CH Down] to select the desred zone.
AUTOMATIC SCAN TYPE:
Channel settng s not necessary for ths type. When turnng the
power ON, the transcever automatcally starts scannng. Scannng
stops when recevng a call.