12
USER SETTINGS
12-14
<Key opeomaioI>
Pooamble:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
Push [RX Noise Cancel] to set the RX Noise Cancel
level�
L
The setable range is 1 ~ 3, or OFF�
L
When “OFF” is selected, the receive audio noise is not
suppressed�
Pooamble:
For the Non-display types
1� Turn OFF the transceiver�
2� Set [Selector] to Channel 16�
3� While holding down [F1] and [F3], turn ON the
transceiver� Continue holding down [F1] and [F3]
for about 3 seconds�
•
2 beeps sound�
•
The transceiver enters the RX Noise Cancel level Set
mode�
4� Push [F2] to increase, or push [F3] to decrease
the RX Noise Cancel level�
InoormaioI
L
•
The setable range is 1 ~ 3, or OFF�
•
When “OFF” is selected, the receive audio noise is not
suppressed�
•
A beep sounds after pushing [F2] or [F3]� An error
beep sounds if you try to exceed the setable range�
1
3
2
OFF
: Push [F2]
: Push [F3]
5� Turn OFF the transceiver, then turn it ON again to
exit the RX Noise Cancel
level
Set mode�
You can set the RX Noise Cancel level to between 1
(minimum) and 3 (maximum), or OFF to suppress the
receive audio noise to make the audio easy to hear�
Higher values suppress the audio noise more, but the
audio quality decreases�
<MeIu opeomaioI>
Pooamble:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
( Menu > Audio Setting >
RX Noise CmIcel
)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select “Audio Setting,”
then push [OK]�
3� Push [Up] or [Down] to select “RX Noise Cancel,”
then push [OK]�
4� Push [Up] or [Down] to set the RX Noise Cancel
level�
L
The setable range is 1 ~ 3, or OFF�
L
When “OFF” is selected, the receive audio noise is
not suppressed�
5� Hold down [Back] for 1 second to return to the
standby screen�
[VOL]
[F1]
[F2]
[F3]
[Selector]
SeaaiIg ahe RX Noise CmIcel level
