3
BASIC OPERATION
3-5
D
Rewriting the Priority A or B channel
(Menu > Channel/Scan >
Prio A (RW)
)
(Menu > Channel/Scan >
Prio B (RW)
)
1� Select a channel to be set as the Priority A or B
channel. (p. 3-4)
2� Push [Menu] to display the “Menu” screen.
3� Push [P2 (Up)] or [P1 (Down)] to select “Channel/
Scan,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
4� Push [P2 (Up)] or [P1 (Down)] to select “Prio A
(RW)” or “Prio B (RW)” and push [OK].
Priority A CH
►
Prio A (RW)
►
Channel/Scan
5� After a dialog is displayed, as shown below, push
[P2 (Up)] or [P1 (Down)] to select <OK> on the
dialog, then push [OK].
R
Are u Sure?
Cancel
OK
Prio A (RW)
•“Prio A (RW)” is briefly displayed.
•Sets the selected channel as the Priority A or B
channel�
6� Hold down [Back] for 1 second to return to the
standby screen�
TIP:
Hold down [Prio A (Rewrite)] or
[Prio B (Rewrite)] for 1 second to set the currently
selected channel as the Priority A or B channel�
D
Selecting a Continuous tone channel
(Menu > Channel/Scan >
C.Tone CH Sel
)
1� While in the Analog mode, push [Menu] to display
the “Menu” screen.
2� Push [P2 (Up)] or [P1 (Down)] to select “Channel/
Scan,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “C.Tone
CH Sel,” then push [OK]�
C.Tone CH Sel
►
Compander
►
Channel/Scan
4� Push [P2 (Up)] or [P1 (Down)] to select a
Continuous tone channel, then push [OK].
✔
1
✔
2
C�Tone CH Sel
C.Tone CH Sel
2
• The selected Continuous tone channel is briefly
displayed and set�
5� Hold down [Back] for 1 second to return to the
standby screen�
TIP:
While in the Analog mode, push
[C�Tone CH Select] to directly display the “C�Tone
CH Sel” screen in step 4 above�
Selecting a channel (Continued)