![background image](http://html1.mh-extra.com/html/icom/ic-f5120d-series/ic-f5120d-series_operating-manual_612616017.webp)
14
3
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Transmitting an Emergency Call
When [Emergency] (described in the instruction manual) is held
down for the specified time period, the emergency signal is trans-
mitted once or repeatedly* on the emergency channel. When no
emergency channel is specified, the signal is transmitted on the
operating channel.
* When the Repeat Cancel function is ON, the transceiver cancels
repeat calling after receiving an acknowledgement.
When the Repeat Cancel function is OFF, the transceiver continues
to call according to the number of repeat cycles, even after receiv-
ing an acknowledgement.
Individual or Talkgroup call types of emergency calls can be
preset. If the call type is not preset, the default or selected
call type is used.
If you want to cancel the emergency call, hold down
[Emergency] again before transmitting the call.
The emergency call can be transmitted without sounding
beeps or changing the LCD display, depending on the pre-
programming. (Silent operation)
The transceiver can also be programmed to keep the micro-
phone open during an emergency call, allowing other stations
to monitor the situation.
Ask your dealer for details.
IMPORTANT:
Setting an individual emergency channel is
recommended for dependable emergency call operation.
NOTE:
When the Digital Request Ack function is activated, the
transceiver transmits an emergency call with a request to
send back an acknowledgment.