![background image](http://html1.mh-extra.com/html/icom/ic-f5120d-series/ic-f5120d-series_operating-manual_612616016.webp)
13
3
IDAS OPERATION
■
Transmitting a call (continued)
D
Transmitting a Message
The transceiver has the ability to send a preprogrammed
message.
There are 10 messages that can be sent.
q
Push [Digital Button] to enter the application selection
mode.
• “VOICE” appears.
• To change to the desired call type, hold down [Digital Button] for
1 second while in standby. After changing, the transceiver auto-
matically enters the application selection mode.
w
Push [CH Up] or [CH Down] to select “MSG.”
e
Push [Digital Button] again to enter the message selection
mode.
• The preprogrammed message is displayed.
r
Push [CH Up] or [CH Down] to select the desired message.
Preprogrammed message is displayed.
t
Push [Digital Button] again to enter the Individual or Talk-
group ID selection mode.
• The preprogrammed ID name is displayed.
• When an ID name is not programmed, the ID code is displayed.
• The primarily ID can be preset to display first.
y
Push [CH Up] or [CH Down] to select the desired ID name
(or ID code).
Individual or Talkgroup ID name is displayed.
u
Push [PTT] to transmit the message.
• “MSG TX” is displayed.
i
Release [PTT].
• “MSG OK” is displayed after receiving an acknowledgement
from a base station.
• “MSG FAIL” is displayed if there is no acknowledgment from the
base station.
o
After a specified time period has passed, the transceiver
will return to standby.