![background image](http://html2.mh-extra.com/html/icom/ic-f510/ic-f510_instruction-manual_3735276016.webp)
13
3
BIIS OPERATION
New2001
■
Transmitting a call
A total of 3 ways for code selection are available— selecting
the call code from memory, entering the call code from the
keypad and calling back from the queue channel record.
D
D
Using call memory
q
During standby condition, push [DIGITAL (P1)] to select
call code memory channel.
• “
” appears.
w
Push [
]/[
] to select the desired call code.
e
Push [CALL (P0)] or [PTT]* to call.
*PTT call can be made only when PTT call capability is permitted.
NOTE:
When no answer back is received, the trans-
ceiver repeats the call 3 times (default) automatically,
and “
” is displayed during each call. However, an
error beep sounds and “
” is displayed when no
answer back is received after the calls.
r
Push [PTT] to transmit; release to receive.
t
Push [MONI (P4)] to clear down.
D
D
Calling back from the queue channel
q
During standby condition, push [DIGITAL (P1)] for 1 sec. to
select queue memory.
w
Push [
]/[
] to select the desired record.
e
Push [CALL (P0)] or [PTT]* to call.
*PTT call can be made only when PTT call capability is permitted.
NOTE:
When no answer back is received, the trans-
ceiver repeats the call 3 times (default) automatically,
and “
” is displayed during each call. However, an
error beep sounds and “
” is displayed when no
answer back is received after the calls.
r
Push [PTT] to transmit; release to receive.
t
Push [MONI (P4)] to clear down.
Queue memory content is displayed.
Appears
IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 13 (1,1)