12
3
BIIS OPERATION
New2001
D
D
Group call
q
When a group call is received;
• Beeps sound.
• “
” appears and the mute is released.
• The programmed text message
(e.g. “
”)
and the calling station ID (or text) is displayed alternately.
• “
” appears or blinks depending on the setting.
w
Push and hold [PTT] (microphone), then speak into the mi-
crophone at a normal voice level.
NOTE:
Only one station is permitted.
• “
” appears during transmit.
e
Release [PTT] to return to receive.
• “
” appears while receiving a signal.
r
To finish the conversation, push [MONI (P4)] to send the
“Clear down” signal.
• Either station can send.
• “
” is displayed for 2 sec. (approx.).
• “
” disappears and the transceiver return to standby condition.
D
D
Displaying the received call record
— Queue indication
The transceiver memorizes the calling station IDs for record.
Up to 3 calls can be memorized, and the oldest call record is
erased when a 4th call is received. However, once the trans-
ceiver is powered OFF, all records are cleared.
q
Push [DIGITAL (P1)] for 1 sec.
• Displays following indication.
w
Push [
]/[
] to select the desired call.
e
Push [DIGITAL (P1)] for 1 sec. again to return to standby
condition.
• When no operation is performed for 30 sec., the transceiver re-
turns to standby condition automatically.
• When a record is available
• When no record is available
Appears
Appears or blinks
IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 12 (1,1)
